Carpet Cleaning | 4 Step-By-Step Guidelines To Remove Embedded Cigarette Ash From Carpets
Embedded cigarette ash is sure to leave your carpet with unsightly stains that will become worse if not addressed quickly. The longer ash is allowed to ingrain into the carpet fibres, the more difficult it will be to remove over time. Embedded ash stains are usually visible on most carpets, so you need to ensure that you follow an efficient carpet cleaning process to remove all ash residue. Follow these step-by-step guidelines to remove embedded cigarette ash from carpets.
Vacuum The Stained Area
Vacuum the ash-laden carpet area with your vacuum cleaner to remove the loose ash from the carpet fibres. You will want to avoid using anything to rub it out of the carpet because this could end up embedding the ash deeper into the carpet, so use only the suction pipe without the brush attachment. This carpet cleaning step will remove as much loose ash as possible.
Sprinkle the Stained Area With Baking Soda
Once you have vacuumed the stain, it's time for you to tackle the trapped ash embedded deep into the carpet fibres. Baking powder is an absorbent substance and will interact with the embedded carpet ash to loosen it from the fibres. Sprinkle baking soda generously over the carpet ash stain and let it sit for a few hours. You should then vacuum this baking soda and loosened ash from the carpet surface using only the suction pipe. This carpet cleaning step will likely remove most of the ash from the surface.
Blot The Stain With White Vinegar
White vinegar contains acetic acid, which makes it an excellent cleaning agent for removing any residual ash stains from carpets. You simply need to blot the remaining stain with white vinegar, but take care not to rub it because it may spread to non-stained parts or may push the ash further into the carpet. Let the vinegar sit on the stain for a little while and then wipe it away using a dry lint-free or microfibre cloth. Repeat this process until the ash stain disappears completely.
Sponge And Dry The Carpet
Use clean water to sponge the stained part of the carpet to get rid of the white vinegar smell. You will then need to wait until your carpet dries completely before allowing anyone on it again. To speed up the drying process, make sure the room is properly ventilated and choose a sunny day for this task.
Follow these carpet cleaning steps to thoroughly remove embedded ash from your carpets.